V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Caution! A new contact reel is supplied in the middle position with a locking screw installed. Check that the locking screw is fastened as
illustrated.
-
Undo the locking screw so that the contact reel can be turned.
-
Turn the contact reel fully to the right.
-
Turn the contact reel approximately three times to the left.
-
The slot of the screw must then be in the 1 o'clock position, as illustrated.
-
Secure the contact reel in this position with the locking screw.
Install contact reel
