V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Tie Rod: Removal and Replacement
Ball joint tie rod, protective bellow or tie rod, replacing
Special tools:
999 7019 Lock key See: Tools and Equipment/999 7019 Lock Key
999 7020 Counterhold See: Tools and Equipment/999 7020 Counterhold
999 7021 Distance to 9997020 See: Tools and Equipment/999 7021 Distance to 9997020
999 5637 Puller See: Tools and Equipment/999 5637 Puller
Removal
Removing wheels
Note! The wheel must be removed before the tie rod can be removed.
Raise the car to a comfortable working height. Remove the wheel.
Removing the ball joint for the tie rod
Slacken off the locknut for the tie rod.
Remove the pin and the castle nut (if applicable), or the lock nut for the ball joint for the tie rod.
Use special tool 999 5637 Puller See: Tools and Equipment/999 5637 Puller.
Warning! Tie the tool in place using the cord so that it cannot fall off and cause damage.
Press out the ball joint with the special tool.
Remove the ball joint from the tie rod (note the number of turns).
Removing the boot
