V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Remove the Torx TX4O screws for the control system cover. Remove the cover.
Use tool 999 5477. Tap the tool carefully into the joint between the cover and the transmission to ensure that the cover sealing flange is not distorted.
Take care not to damage the oil temperature sensor cables.
Clean the gasket residue from the cover and the transmission. Use a scraper.
NOTE! Ensure that no debris enters the transmission. Wash the cover thoroughly.
Disconnecting connections
Disconnect the connectors for the solenoid valves (S1, S2, SL, STH).
Remove the cable harness from the holders on the control system.
Checking the cable harness