volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing Accumulator Pistons/Sealing Rings B2/C2|Page 15680 > < Replacing Accumulator Pistons/Sealing Rings B2/C2|Page 15678
Page 4
background image

 Reinstall valves and springs.

 Reinstall cover plate and gasket.

6 screws. Tightening torque:  6.5 Nm.

Note! Excessive torque may impose stress on the control system, causing valves to stick.

Reinstalling control system

Reinstall the control system in the transmission according to  Replacing control system See: Valve Body/Service and Repair/Removal and Replacement 
and  Replacing control system See: Valve Body/Service and Repair/Removal and Replacement.

Filling and checking oil

Fill transmission with oil and check level according to  Checking oil level See: Service and Repair/Procedures/Checking Oil Level.

Checking diagnostic trouble codes (DTCs)

Replacing Accumulator Pistons/Sealing Rings B2/C2|Page 15680 > < Replacing Accumulator Pistons/Sealing Rings B2/C2|Page 15678