V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Make a note of the anti-theft radio code.
Disconnect the battery negative lead.
To remove front and rear center consoles, see Replacing the transmission cable See: Shift Linkage/Shift Cable/Service and Repair/Removal and
Replacement.
Remove lamp holder from light molding.
Remove gear selector knob according to Replacing gear selector knob See: Replacing Gear Selector Knob.
Removing gear selector assembly
Disconnect transmission cable from gear selector assembly.
Use flat-nosed pliers to remove cable pin.
Remove retaining clip securing cable sleeve to gear selector assembly.
Remove:
-
Gear selector assembly screws (four)
-
Cable harness clips (from behind). Split connectors
-
Gear selector assembly.
Caution! Take care not to bent the transmission cable.
Installing gear selector assembly and transmission cable