volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 16473 > < Procedures|Page 16471
Page 2
background image

Ignition off
Remove:

-

Center console locker or large-fronted radio

-

Ashtray holder (2 screws)

-

Right side panel

-

Remove the control module from the bracket

-

Disconnect the control module connector

-

Remove the control module.

Installing the control module

Check that none of the pins or sockets on the connector are damaged.

-

Install the new control module

-

Ignition on

-

Read off and erase any diagnostic trouble codes (DTCs).

-

Reinstall panels, center console locker etc.

Adapting the throttle position (TP) signal

Procedures|Page 16473 > < Procedures|Page 16471