V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Remove solenoid screw.
Remove solenoid from control system.
Install a new solenoid.
Apply a little petroleum jelly to solenoid O-ring (S1, S2, SL).
Install solenoid. Tighten screw.
Tightening torque: 7 Nm.
Reconnect solenoid connector.
Connector/cable colors:
Solenoid S1: White/white
Solenoid S2: Black/black
Solenoid SL: Black/yellow
Solenoid STH: Black/blue, brown
Installing components
Reinstall control system cover, oil pipe and other components according to Replacing control system See: Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement
Filling and checking oil
Fill transmission with oil and check level according to Checking oil level See: Automatic Transmission/Transaxle/Service and
Repair/Procedures/Checking Oil Level.
Checking diagnostic trouble codes (DTCs)