V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Transmission Temperature Sensor/Switch: Procedures
Replacing oil temperature sensor
Removal
Preparations
Remove
-
The battery.
-
The air cleaner (ACL) housing assembly, see Replacing the air cleaner (ACL).
-
The battery shelf.
Removing the cable harness
Remove:
-
The transmission cable from the lever.
-
The lever
-
The nut, the locking washer and the rubber washer for the gear shift linkage rod.
-
The dip stick pipe. Lift up the pipe and turn it to one side.
-
The mounting screws for the gear-shift position sensor (two)
Carefully lift the sensor from the gear shift linkage rod.
CAUTION: If the metal tongue on the gear-shift position sensor gets stuck on the transmission cable bracket: Remove the gear selector bracket. Put
the bracket to one side.
Removing the cable harness
