V40 L4-1.9L Turbo VIN 27 B4204T4 (2003)
-
Wipe up any spilled oil. Clean the mating surfaces
-
Install a new O-ring
-
Position the system. Turn the system into the correct position
-
Install the bolt. Tighten to 8 Nm
-
Connect the wiring.
Install the cover on the timing gear.
Start the engine. Check for leakage.
Replacing the Variable Valve Timing (VVT) Control Valve
Replacing The Variable Valve Timing (VVT) Control Valve
Preparations
Remove: