V40 L4-1.9L Turbo VIN 27 B4204T4 (2003)
Removing the timing belt
Remove the timing belt. See Replacing the timing belt See: Timing Components/Timing Belt/Service and Repair/Removal and Replacement.
Removing the timing gear pulley
Remove the timing gear pulley. See Camshaft seals, replacing See: Seals and Gaskets/Camshaft Oil Seal/Service and Repair/Removal and Replacement.
Removing the camshaft cover and valve lifters
Caution! Mark the positions of the valve lifters so that the valve lifters are in the same position when installed.
Note! Do not remove the cylinder head.
Remove the camshaft cover and valve lifters. See See: Cylinder Head Assembly/Service and Repair/Removal and Replacement.
Cleaning
Use a razor blade or a gasket scraper and gasket solvent P/N 1161 440 on the camshaft cover.
Warning! Use a fume hood or extractor when using gasket solvent.
Use only a gasket scraper or razor blade on the cylinder head.
Note! Take great care around the oil ducts for the variable valve timing solenoid. This applies to both the camshaft cover and the cylinder head.
The solenoid is extremely sensitive to contaminants.
Dry and blow all surfaces clean.
Preparations
