V40 L4-1.9L Turbo VIN 27 B4204T4 (2003)
NOTE: Hold the pipe in place with your hand when removing and tightening to avoid damaging couplings and pipes.
Remove:
-
the bolts on the mountings.
-
the battery clamp.
-
the pipe carefully.
Removing The Pipe Between The Refrigerant Reservoir And The Condenser
NOTE: Always use new O-rings.
Fit:
-
the pipe
-
the battery
-
the O-rings
Oil O-rings with AC compressor oil
Connect the pipe and tighten the bolts by hand.
Tighten:
-
the bolt at the refrigerant reservoir to 10 Nm.
-
the bolt at the condenser coupling to 10 Nm.
Hose Between The Compressor And Condenser
Removing The Hose Between The Compressor And Condenser
