V40 L4-1.9L Turbo VIN 27 B4204T4 (2003)
Place a container beneath the transmission to catch the oil.
Remove the hose clamp and disconnect the return hose from the pipe running to the control system cover.
Install a plastic plug in the pipe.
Install a transparent plastic hose on the oil return line.
Ensure that the hose flows into the container.
Refilling
Refilling
-
Apply the parking brake. Move the gear selector lever to position P
-
Fill with approximately 2 liters of oil through the dip stick pipe
-
Start the engine and let it idle
-
Turn the engine off when air bubbles start to become visible in the hose
-
Add approximately 2 liters of oil
-
Start the engine again and let it idle
-
Turn the engine off when air bubbles start to become visible in the hose
-
Remove the transparent hose from the return hose.
Install:
-
the return hose on the pipe running to the control system cover
-
a new hose clamp.
Filling, continued
-
Add approximately 2 liters of oil
-
Set parking brake