V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Alarm Module: Procedures
Initializing The Immobilizer Control Module
Information
This function is used when a defective control module has been replaced. During initialization, software is downloaded into the control module first. The
key codes for all keys are then programmed in.
Ordering Software/keys
NOTE: Software and keys must be ordered before the immobilizer control module can be initialized.
Order software and keys for the S/V 40.
For Engine B4184SJ With Melco 2 Engine Control Module (ECM)
Order the software and keys.
Initializing The Control Module
NOTE: Programming/initialization can be carried out when the keys and/or software have been delivered.
Program/initialize the control module for the S/V 40.
For Engine B4184SJ With Melco 2 Engine Control Module (ECM)
Program/initialize the control module.
Check in VADIS that no diagnostic trouble codes (DTCs) have been stored during the process.