volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 10152 > < Initial Inspection and Diagnostic Overview|Page 10150
Page 44
background image

Substitute value

-

None.

Possible source

-

Contact resistance or oxidation in the connectors

-

Open-circuit, short-circuit to ground or short-circuit to voltage in the signal cable between the audio unit and the combined instrument panel

-

Faulty signal from the combined instrument panel.

Fault symptom[s]

-

The car's position on the map is incorrect

-

The RTI system is not working.

Checking The Speed Signal, Audio HU1205

Checking the speed signal, Audio HU1205

Checking the speed signal

Activate the diagnostic menu. See Diagnostic functions Audio HU1205 (audio module) See: Description and Operation/Diagnostic Functions Audio
HU1205 (Audio Module).
Read off the vehicle speed signal from the combined instrument panel according to 2.1 Circuit check (parameter a). See Diagnostic functions Audio
HU1205 (audio module) See: Description and Operation/Diagnostic Functions Audio HU1205 (Audio Module).
Test drive the car. Check that the value of the vehicle speed signal increases and decreases with speed.

Initial Inspection and Diagnostic Overview|Page 10152 > < Initial Inspection and Diagnostic Overview|Page 10150