V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Front Door Exterior Handle: Service and Repair
Replacing the door handle
Removal
Removing the handle and the handle housing
-
Remove the lock instructions (A) on the pin. Use a file or a grinder
-
Support the mountings and at the same time carefully tap out the pin (B)
Note! Do not bend the corresponding parts when installing.
-
Tap out the pin (B) and remove the spring (C), with or without the bushing (D)
-
Twist the handle to remove it from the housing
-
Remove the damper rubber and the special nuts if necessary (E).
Installation
Installing the damper rubber and special nuts