V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Fuel Door Release Actuator: Service and Repair
Fuel tank filler cover motor
Preparation
Remove left side panel in the cargo compartment
-
For S40, see Removing and installing side panels in the cargo compartment, S40 .
-
For V40, see Replacing side panels in the cargo compartment V40 .
Removing motor bracket
Only S40:
-
Remove foam.
-
Remove earth bolt and bracket bolt from the antenna.
-
Remove antenna bolt at the top.
-
Remove antenna completely.
S40 and V40:
-
If filler cover motor is defect, pull the rod to the rear of the car.
-
Open filler cover:
-
Remove bolt inside filler cover.
-
Remove connector and bolt, remove the bracket.
Removing motor
-
Remove screws (2x).
-
Take motor from rod.
Installing motor
Install:
-
New motor and rod.
-
Screws (2x).
Installing motor bracket