V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Power Door Lock Actuator: Technical Service Bulletins
Body - Securing/Changing Lock Motors
Section
8
Group
83
No:
0039
Year
03
Month
05
Central locking motor in the front and rear doors, securing/changing
Background:
This Service bulletin describes a new method for the installation or replacement of the central locking motors and a corrective action to the locks when
replacing the doors.
Affected vehicles
Model
Chassis No.
S40, V40 000001 - 942620
Lock, handle
Central locking motor, installation
1
Description of the central locking motors, front and rear doors
The inner lock assembly must be removed if the motor is to be replaced.
Note! Use the illustrations to determine which version applies!
Version A: No extra mounting for the motor
Version B (chassis no -94 2619): from the 2000 onwards a bracket was installed at the bottom of the motor The bracket is secured in the door panel.
Version C (chassis no 94 2620-): The motor is secured by a screw in the door panel.
2
Removing/installing the central locking motor
