V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Spot blaster
The pistol has 7 revolving suction nozzles which have been developed in conjunction with experienced vehicle painters. These various nozzles are
airtight in all the difficult corners and edges of the vehicle. The suction nozzles are made of special rubber which can tolerate long periods of blasting.
They prevent dust and dirt from being blown around the premises and protect the paintwork around the damaged area at the same time.
It is important to remove the rust by sand-blasting only, as the vehicle's original paintwork is always stronger than paint repairs.
Note! Sand-blasted surfaces should be sanded with P 280 sandpaper and blown clean with compressed air.
Note! A sand-blasted surface corrodes very easily. The surface should not be exposed to moisture and should be coated with primer as soon as
possible.
