V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Radiator Support: Service and Repair
Replacing The Lower Radiator Member
Replacing the lower radiator member
The extent of the damage may vary and with it the number of components that need to be removed.
See Front section See: Service and Repair/Removal and Replacement/Bodywork Preparations/Front Section.
Removing the lower radiator member
Drill or grind out the spot welds.
Pry off the member.
Grind clean.
Check that the dimensions of the car are correct. See Bodywork dimensions .
Installing the lower radiator member
Grind the welding surfaces clean.
Apply welding primer.
Adjust the member.
Check the A and B dimensions. See Bodywork dimensions .
Secure the member.
Weld into place.
Hint: Use the painted edges from the removed member as an aide when aligning.
Replacing The Upper Radiator Member
Replacing the upper radiator member
The extent of the damage may vary and with it the number of components that need to be removed.
See Front section See: Service and Repair/Removal and Replacement/Bodywork Preparations/Front Section.