V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
CAUTION: Ensure that the heater pad is correctly positioned so that the half moon clips can be secured clear of the heater elements and the surface of
the heater pad.
-
Position the heater pad in the correct position. Do not remove the backing from the adhesive surfaces.
-
Secure one half of the heater pad.
-
Bend up the other half of the heater pad.
-
Pull the backing (or part of the backing) off the adhesive surface closest to the center of the section of the heater pad that is bent up.
-
Carefully bring the adhesive surface down onto the foam filling. Work with small sections at a time. Start from the center and work out towards the
edges.
-
Continue in the same way with the other adhesive surfaces.
Positioning In Relation To The Channels In The Foam Filling
