V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Seat Heater: Removal and Replacement
Heater Pad Seat Cushion
Heater pad seat cushion
Special tools:
115 8962 CRIMP PLIERS See: Tools and Equipment/115 8962 Crimp Pliers
Note! The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing the front seat
Remove:
-
the front seat. See Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing
-
the seat cushion upholstery. See Seat cushion, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front
Seat/Seat Cushion, Replacing.
Caution! The old heater pad must be removed first. A new heater pad must not be bonded over the old pad.
Note! Read through the entire section before beginning work.
Types of heater pad
A sequence of illustrations displaying a number of different heater pads for both the seat cushion and the backrest now follows.
Caution! It is imperative that the correct type of heater pad is used to match the shape of the foam filling.
The heater pads displayed in the stages below apply to both the front and rear seats.
General information about different types of heater pads
Heater pad for backrests and cushions, front seats