V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the vacuum reservoir in cars with cruise control. Tighten to 10 Nm
-
the two nuts. Install the relay holder and the control module. Tighten to 10 Nm
-
the dashboard
-
the battery negative lead. See Note when disconnecting and connecting the battery lead See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting.
Caution! Always connect the battery lead according to Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Checking the stop lamp switch
Check that the stop lamp lights when the brake pedal is pressed down approximately 5 mm.
If necessary, adjust the stop lamp switch. See Stop lamp switch, adjustment See: Lighting and Horns/Brake Light Switch/Adjustments.