V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Brake Warning Indicator: Testing and Inspection
Checking ABS Warning Lamp
Checking ABS Warning Lamp
HINT: After carrying out the repair, check that the fault has been remedied as follows:
-
Ignition off.
-
Disconnect the breakout box if this has not already been done.
-
Reinstall the connectors, components etc.
-
Ignition on.
When the ignition is switched on the control module lights the ABS warning lamp which should go out again after 4 seconds.
HINT: The lamp does not go out if the control module has detected a fault.
