V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Inspect
-
the brake disc, see operation Replacing front brake pads See: Brake Pad/Service and Repair/Removal and Replacement/Replacing Front Brake
Pads.
-
the brake caliper guide, see operation Replacing front brake pads See: Brake Pad/Service and Repair/Removal and Replacement/Replacing Front
Brake Pads.
Install the brake pads, paying attention to the wear-indicator.
Install the brake caliper to the guide pins.
Tighten to 35 Nm.
Install the brake hose. Use new sealings.
Tightening torque 15 Nm.
Make sure that the brake hose is not twisted.
Bleed the brake system, see operation Bleeding brake system See: Brake Bleeding/Service and Repair.
Install the wheel, see operation Replacing front brake pads See: Brake Pad/Service and Repair/Removal and Replacement/Replacing Front Brake Pads.
Rear Brake Caliper Reconditioning
Reconditioning rear brake calipers
Special tools:
981 4071 STRAIGHTENING TOOL See: Tools and Equipment/981 4071 Straightening Tool
999 5634 Wrench See: Tools and Equipment/999 5634 Wrench
Preparations
Set the parking brake mechanism using the central adjuster nut in the parking brake handle.
Remove the wheel.
Clean the brake caliper thoroughly.
Draining the brake fluid
