V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Check that the mating surface on the brake discs and the wheel rims are clean.
Lubricate the hub center guide for the rim using anticorrosion agent, Volvo P/N 1161038-3
Install the wheel. Tighten the nuts lightly. Then tighten the screws crosswise. Tighten to 110 Nm. When tightening using an impact wrench, torque
socket 951 2834 must be used.
NOTE: Crosswise tightening and the correct tightening torques are important to avoid stresses in the brake disc.
Rear Brake Pads
Replacing The Rear Brake Pads
Special Tools: 999 5782, 951 2834
General
CAUTION: Replace the brake pads when the minimum thickness is 2 mm.
Removing the rear brake pads
Remove
