V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Block the brake caliper against the brake disc. Use special tool 999 5782.
-
Turn the plate (A) forward over the shaft and insert the tool
-
Install the lugs (B) in the cut-out in the brake piston
-
Turn the shaft (C) so that the plate (A) presses against the brake caliper
-
Turn the axle (D) to the right and press the piston back while turning the shaft (C) to the right so that the plate (A) is in contact with the brake
caliper
-
Turn the brake piston back fully and remove the tool.
Installing the rear brake pads
