V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
Engine coolant temperature (ECT) sensor (A/C)
Removing the engine coolant temperature (ECT) sensor
-
Remove the soundproofing panel according to Passenger side soundproofing See: Body and Frame/Sound Proofing / Insulation/Service and
Repair/Passenger Side Soundproofing
-
Disconnect the 4-pin connector
-
Carefully remove the sensor from the sleeve.
Installing the engine coolant temperature (ECT) sensor
-
Check that the retaining clip is positioned correctly in the heater unit
-
Install the sensor carefully in the casing. Check that it is installed correctly
-
Connect the connector
-
Check the function
-
Install the soundproofing panel according to Passenger side soundproofing See: Body and Frame/Sound Proofing / Insulation/Service and
Repair/Passenger Side Soundproofing.