V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Reinstalling the cable harness at the outer side of the fan assembly
6
Slide the connector (1) to the cooling fan assembly. Do not connect the connector (2).
Slide the protective sleeve up as high as possible.
Guide the wiring (3) into the fan assembly.
Feed the wiring along the bottom side of the fan shroud assembly. See drawing.
Press the resistor into the clamp.
Fix the wiring using tie straps (4), as close to the splicing sleeves as possible.
Ensure that the wirings cannot chafe or be damaged.
Install:
-
the connector (2)
-
lower splash guard.
Check the cooling fan function according to VADIS.
Reinstalling the cable harness inside the fan assembly
7
Slide connector (1) to the cooling fan assembly. Do not connect the connector (2).
Slide the protective sleeve into place.
Position the wiring in the fan assembly (3). Press the resistor into the clamp. Close the clamp (4).
Feed the wiring into the fan assembly with a loop. Install two tie straps (5) to secure the wiring.
Ensure that the wirings cannot chafe or be damaged.
Install:
-
the connector (2)
-
lower splash guard.
Check the cooling fan function according to VADIS.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.