V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Use a razor blade or a gasket scraper and gasket solvent P/N 1161 440 on the camshaft cover.
Warning: Use a fume hood or extractor when using gasket solvent.
Use only a gasket scraper or razor blade on the cylinder head.
Note: Take great care around the oil ducts for the variable valve timing solenoid. This applies to both the camshaft cover and the cylinder head. The
solenoid is extremely sensitive to contaminants.
Dry and blow all surfaces clean.
Preparations
Carefully tap the end of the valve stem to ensure that the valve is correctly located in the seat. Use a plastic, aluminum or brass drift to protect the
valve and the surface of the valve lifter.
The sound made by tapping reveals if the valve is correctly seated.
Installing the camshaft and valve lifter
Install both the valve lifters for the inlet valves at cylinder
Check the notes made earlier. Select new valve lifters if necessary.
