V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Wipe the oil film off the mating surfaces on the camshaft cover and cylinder head.
Install new O-rings around the spark plug wells on the cylinder head.
Apply liquid gasket 116 1059 to the camshaft cover.
Use roller 951 2767 Roller See: Tools and Equipment/951 2767 Roller.
The surface must be completely covered without any excess.
Note! Ensure that no liquid gasket gets into the coolant or oil ducts. Only a thin layer of liquid gasket is required.
Installing the camshaft covers
Tighten the camshaft cover. Tighten to 14 Nm.