V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the engine mounting with the hole pointing backwards
-
the screws (C). Tighten to 35 Nm
-
the screw and the nut (B). Tighten by hand
-
the screws (A). Tighten to 69 Nm.
Note! Ensure that the bushings are correctly positioned (as illustrated).
Remove the screw (B) for the front engine mounting.
Tighten the rear screw first, then the front screw. Tighten to 55 Nm.
Install:
-
the heat deflector plate
-
the parallel strut for the front suspension.