V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Oil Pan: Specifications
Press the oil pan against the transmission.
Tighten the screws (1), (2), (3) and (4)............................................................................................................................................................................3 Nm
First Tighten the screws (5)............................................................................................................................................................................................25 Nm
Then tighten...................................................................................................................................................................................................................48 Nm
Tighten all screws in the oil pan joint.............................................................................................................................................................................17 Nm
Connect the oil cooler to the oil pan.
Use four screws. Tighten................................................................................................................................................................................................17 Nm
Install the front-rear member to the body. Use four screws. Tighten.............................................................................................................................69 Nm
Tighten the screws in the engine mountings. Tighten.....................................................................................................................................................55 Nm
Install the heat deflector plate in front of the output shaft. Tighten...............................................................................................................................10 Nm
Install the support strut between the suspension turrets. Tighten...................................................................................................................................55 Nm
Install new oil filter.
Install the oil plug with a new gasket. Tighten...............................................................................................................................................................35 Nm
Oil trap...........................................................................................................................................................................................................................15 Nm
Oil pan plug....................................................................................................................................................................................................................38 Nm