V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Note! Ensure that the gasket faces are clean.
Install:
-
a new gasket
-
the vacuum hose
-
the two heater hoses using a new G-clamp
-
the intake manifold. Do not forget the crankcase ventilation hose. The hose must be inserted up through the gap between the second and third ducts
-
the screws.
Tighten all the screws starting from the center. Tighten to 20 Nm.
Install and tighten the screws for the support bracket (under the intake manifold).
Installing components
