V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Remove the plug at the front edge of the variable valve timing unit (TORX 55)
-
Remove the center screw from the VVT unit (TORX 55).
Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit. A small amount of oil may run out. Place paper underneath.
Timing gear pulleys without variable valve timing units:
-
Remove the screws for the timing gear pulley. Use counterhold 999 5199
-
Remove the timing gear pulley
-
Remove tool 999 5452
-
Remove the screw holding the inner timing cover to the cylinder head.
Replacing the camshaft seal
