V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
the upper radiator hose together with the cover for the thermostat housing
-
the screw holding the dip stick pipe to the intake manifold
-
the connectors from the assisted air control valve and the throttle position (TP) sensor
-
the hose for the crankcase ventilation from the camshaft cover
-
the vacuum hoses from the intake manifold, mark up the position
-
the bracket between the servo pump and intake manifold
-
the screws holding the intake manifold to the cylinder head
-
the intake manifold.
Removing the timing gear pulley
Remove the timing gear pulley. See: Camshaft Oil Seal/Service and Repair/Procedures
Releasing the intake pipe for the coolant pump
Remove the two screws at the coolant pipe connection to the bypass channel.
Carefully turn the pipe to remove it from the cylinder block.
Removing the camshaft cover and cylinder head
Remove: