V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Remove:
-
the screw from the ignition coils' ground.
-
the camshaft position sensor.
Remove:
-
the ignition coils' connectors.
Place the cable harness to the side.
Screw loose the cable channel from the cylinder head's trailing edge and the throttle housing's console. Disconnect cables and hoses from the cylinder
head's trailing edge.
Remove:
-
water temperature sensor's connector.
-
injectors' connectors.
Lay the cable channel and cable harness to the side.
Mark up and remove ignition coils and ignition cables.
Remove:
-
camshaft's rear cover.
-
the camshaft position (CMP) sensor housing
-
the trigger wheel.
Inlet pipe, removing
