V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Remove:
-
the mounting screws for the intake manifold
-
the intake manifold. Allow the crankcase ventilation hose to run through the intake manifold without disconnecting it from the flame trap
-
the two water hoses for the coolant and seal so that coolant vapor cannot seep out
-
the vacuum hose.
Transferring components when replacing the intake manifold
Transfer the throttle body (TB) and the assisted air control valve. Use new gaskets. Tighten to 10 Nm.
Installing the intake manifold and gasket