V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Oil Pressure Sensor: Procedures
Replacing Oil Pressure Sensor
Replacing Oil Pressure Sensor
The oil pressure sensor is at the front of the motor between the dipstick and the starter motor.
-
Disconnect the connector.
-
Unscrew the sensor.
-
Install in reverse order.
Oil Pressure: Inspecting and Replacing the Oil Pressure Sensor
Oil Pressure: Inspecting And Replacing The Oil Pressure Sensor
Special Tools: 999 5270, 5271, 5272, 5273
NOTE: When checking the oil pressure, the engine should be at a temperature which corresponds to 15 minutes normal driving (100 degree C).
Replace the oil and filter if the engine oil grade, type or condition cannot be determined.
Checking the engine oil pressure sensor
