V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Raise the car.
-
Remove the engine cover.
Check:
-
The oil pressure sensor cable and connectors
-
Check for an open-circuit in the cable between the oil pressure sensor and the indicator lamp.
-
Type and remedy; try a new pressure sensor.
NOTE: Use a new seal between the oil pressure sensor and the cylinder block.
Checking oil pressure
-
Use oil pressure gauge kit 999 5270.
-
Adapter 999 5273, hose 999 5272 and gauge 999 5271. Connect these items to the hole on the cylinder block for the oil pressure sensor.
-
Start the engine. Read off the oil pressure at different engine speeds (RPM).
Minimum oil pressure at:
13.3 r/s (800 r/min).................................................................................................................................................................................................0.10 MPa