V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Variable Valve Timing Actuator: Removal and Replacement
Adjusting Or Replacing The Variable Valve Timing Unit
Adjusting or replacing the variable valve timing unit
Special tools:
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5199 COUNTERHOLD See: Tools and Equipment/999 5199 Counterhold
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Note! The crankshaft and camshafts must not be turned more than is stated in the method description!If the shafts are turned in any other way
the valves may be damaged.
Preparations
Prepare the car. See Camshaft seals, replacing See: Seals and Gaskets/Camshaft Oil Seal/Service and Repair/Removal and Replacement.
Removing the variable valve timing unit
Install camshaft adjustment tool 999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool at the
rear of the camshafts.