V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Auxiliary Cabin Heater Overheat Sensor / Switch: Service and Repair
Overheating protection thermostat, flame sensor and Coolant temperature sensor, replace
Removing
Preparations
Remove the heater according to Replacing heat exchanger See: Auxiliary Cabin Heater Housing/Service and Repair.
Removing components
Overheat protection thermostat and the coolant temperature sensor:
Remove:
-
the fuel line quick-release connector, coolant temperature sensor and overheat protection thermostat cover.
-
the engine coolant temperature sensor and the overheat protection thermostat holder.
Cut the cables to the engine coolant temperature sensor, alternatively overheat protection thermostat, approximately 2 cm away from engine coolant
temperature sensor / overheat protection thermostat and strip the cables 4-5 mm.