V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Install a new magnet in position (note the guide pin) and install the bolts
-
Replace the wiring
-
Tighten the bolts to 10 Nm.
Installing the pulley
-
Position the pulley
-
Carefully tap the pulley with a plastic hammer
-
Install extractor: 999 5598 and bushing 999 5600 on the pulley and press the guide bushing into place
-
Tighten the pulley
-
Install the snap ring with the beveled side upwards.
Clutch Driven Plate, Installing
