V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
NOTE: Do not touch the inner runner section or the carbon section with your fingers.
-
Apply compressor oil on all mating surfaces in the spacer ring
-
First install the spacer ring on special tool 999 5604.
-
Carefully position the tool and the spacer ring on the shaft. Do not turn it.
-
Press the spacer ring into place.
Finishing
Installation
-
The wedge in the shaft
-
The adjustment rings
-
The felt spacer rings and the holder (the holder must be at exactly the same level as the sleeve). Use a drift and a cover.
