volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 9377 > < Procedures|Page 9375
Page 3
background image

Note! The radio must be pulled forward a few centimeters before the rear section of the bracket can be removed.

-

Remove the screw behind the rear section of the bracket. Pull the bracket forward slightly.

-

Disconnect the connectors from the switches.

Note! Do not disconnect the radio connectors!

-

Lean the heater controls forwards.

-

Remove the extension piece from the switch pins.

-

Press in the four retaining clips. Remove the switch backwards.

Install in reverse order.

Versions with ECC

Remove ECC

Procedures|Page 9377 > < Procedures|Page 9375