V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
The above table indicates tire size for calibrating the speedometer. The control module uses the wheel circumference and vehicle speed to calculate the
speed displayed.
CALCULATION TYPE FUEL LEVEL IN THE FUEL TANK
Indicates how the control module calculates the fuel level in the fuel tank based on the signal from the level sensor. Select between Attenuated level,
Calculated level or Calculated and Attenuated level.
Select the Attenuated level calculation type for cars with diesel engines (Lucas engine management system) and Bi-fuel cars. Select the Calculated level
for other engines.
DISPLAY, TIME DISPLAY
Indicates whether the display is 12 or the 24 hour.
INITIAL ZEROS
Indicates whether or not the initial zeros for the values should be displayed.
SPEED WARNING
Indicates at which speed the combined instrument panel should warn the driver. The options are Disengaged or 120/130 km/h.
From 2001 model yearinclusive the function is modified. The selectable options are Off or 120/130 km/h. The warning starts at 120 km/h and stops
when a speed of 130 km/h is reached.
FLASHING SPEED WARNING IN TRIP COMPUTER DISPLAY
Indicates whether text should flash in the trip computer when the limit for the speed warning is reached.
This programming is only relevant if the display is installed and the trip computer function is programmed.
NOTE: 2000 model year only.
HIGH TEMPERATURE WARNING/MELCO ECONOMY INDICATION
Indicates the type of signal the combined instrument panel interprets at terminal #B12. The type of input signal depends on the engine management
system that transmits the signal. Select between Not used, Diesel high temperature warning or Melco economy indication.