volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fuel Gauge Sender > < Initial Inspection and Diagnostic Overview|Page 12070
Page 8
background image

(ECM) for EMS2000 switches to gasoline power. This parameter is used to program the length of the time delay. The delay can be set between 0 and 20
minutes
 in increments of 1 minute. The default value is 10 minutes.

NOTE:  Only applies to bi-fuel cars. Protected with a PIN code.

Readable Values (applies To 2000 Model Year -) 

FUNCTION INSTRUMENT, VERSION 
Indicates if the combined instrument panel is equipped for an outside temperature/trip computer function.

FUNCTION SRI 
Indicates if the combined instrument panel is equipped for SRI function or not.

FUNCTION SPEED WARNING 
Indicates if the combined instrument panel is equipped for speed warning or not.

INPUT SIGNAL HIGH TEMPERATURE WARNING/MELCO ECONOMY INDICATION 
Indicates if the combined instrument panel is equipped for input signal to #B12 or not.

NOTE:  This function must be activated for diesel and Melco engine management systems. It must not be activated for other engines

FUNCTION LAMP TEST 10 SECONDS 
Indicates if the combined instrument panel is equipped for lamp test or not.

PROGRAMMED 
Indicates what type of combined instrument panel is installed. Programmed at the factory/supplier or after market.

SPEED SIGNAL TYPE FUNCTION 
Displays which type of speed signal the combined instrument panel is equipped for. No signal or signal from off the ABS system.

DIESEL HIGH TEMPERATURE WARNING FUNCTION 
Indicates if the combined instrument panel is equipped for temperature warning or not.

FUEL TANK VOLUME 
Displays which fuel tank capacity (liters, US gallons and UK gallons) the combined instrument panel is programmed for.

The volume is displayed with three parameters, one for each of the above units.

PIN STATUS 
Displays whether the PIN codes are correctly programmed or not.

The possible values are:

-

No PIN code

-

PIN code 2 Ok, not PIN code 1

-

PIN code 2 Ok, not PIN code 1

-

PIN code 1 Ok, PIN code 2 Ok.

TYPE OF SPEEDOMETER 
Indicates the type of combined instrument panel that is programmed. The possible selections are Kilometer display 0-240 km/h, Miles display 0-140
mph
, Kilometer display 0-260 km/h, Miles display 0-160 mph.

Fuel Gauge Sender > < Initial Inspection and Diagnostic Overview|Page 12070