V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Reinstall the components in reverse order.
Replacing stop (brake) lamp switch
The stop (brake) light switch is located on the pedal box.
Remove:
-
Disconnect the connector
-
unscrew the stop (brake) lamp switch (to the left)
Reinstall:
-
Press the stop (brake) lamp switch as far into the clamp as possible (hold the pedal up).
-
Reconnect the connector.
Adjust:
-
adjust by turning the stop (brake) lamp switch outwards.
Hint: The stop (brake) lamp should light when the pedal has been depressed 5 mm.
Replacing the back-up (reversing) lamp switch