V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Connect the connector. Install the switch
-
Install the mounting screws (A) for the switch
-
Install the lower steering shaft cover
-
Install the 3 screws.
Wiper and/or Turn Signal Indicator Switch
Removing The Wiper Switch
Remove:
-
the lower steering shaft cover (3 screws).
Move the steering shaft to the lowest position.
-
the steering column upper cover.
-
the switch mounting screws (A).
-
the switch and disconnect the connectors.
Wiper Switch, Installation
