V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Position a container under the steering gear to collect the oil.
Use a rag to catch spilled oil.
Remove the pipe clamp (A) from the mounting, right-hand side.
Remove the heated oxygen sensor (HO2S) cable harness from the clamp (A), if applicable.
Disconnect the pipe clamp (B), slide the clamp off the rubber and remove the clamp.
Release the rubber from the delivery line by moving the return line back a little.
Disconnect and release the pipe connection and pull out the pipe.
Immediately plug the opening in the steering gear housing and the pipe.
Remove the pipe and O-rings.
Empty the oil out of the pipe.
Installation
Installing and aligning the delivery line on the steering gear side
