V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Valve Clearance: Service and Repair
Valve Clearance, Setting/Adjusting
Special tools:
999 5006
999 5383
999 5460
999 5452
999 5199
999 5452
999 5454
999 5670
999 5765
999 5752
999 5451
951 2767
999 5454
999 5719
999 5718
999 5450
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparation
Remove:
-
the cable from the battery negative terminal. First read Note when disconnecting and connecting the battery lead.
Removing the starter motor
Remove:
-
the screws for the starter motor
-
the support bracket for the intake manifold
-
the connector for the oil pressure switch
-
unlock the starter motor and allow it to hang.
Removing components
Remove:
-
the cover over the injector
-
the cover over the throttle body (TB)
-
the upper timing cover
-
the cover over the ignition coils
-
front timing cover
-
the inlet hose between the mass air flow (MAF) sensor and throttle body (TB)
-
the auxiliaries belt.
Exposing the cable harness
Remove:
